• Vertical Machining Center UM-85H
  • Vertical Machining Center UM-85H
  • Vertical Machining Center UM-85H

UM-85H

Vertical Machining Center

Vertical Machining Center



· 24-station, swing-arm automatic tool changer .

· Spindle speed 12000 / 15000 rpm

· Direct driven spindle design

· Table dimension: 1100 x 600 mm

· FANUC 0i-M controller with LCD monitor.

· Linear guides on all axis.
ITEM/MODEL UM-85H
Controller FANUC 0i-M
SPINDLE
Spindle speed rpm 12000(15000)
Spindle nose taper BT40
Bearing inner diameter mm 70
Drive system Direct
TRAVELS
X-axis travel mm 850
Y-axis travel mm 550
Z-axis travel mm 550
Spindle nose to table mm 150~700
TABLE
Table dimension mm 1100 x 600
T-slot(No. of T-slot x width x pitch) 5 x 18 x 100
Max. weight on table kg 1000
FEED RATES
X-axis Rapid Traverse Rate m / min 42
Y-axis Rapid Traverse Rate m / min 42
Z-axis Rapid Traverse Rate m / min 36
Cutting feed rate m / min 12
Ball screw diameter(X/Y/Z) mm 45/45/45
Guideway type Roller
AUTOMATIC TOOL CHANGE SYSTEM
Tool magazine capacity pcs 24(30/32)
Max. tool weight kg 7
Max. tool diameter mm 80
Max. tool diameter without adjacent tools mm 150
Method of tool exchange Arm type
Max. tool length mm 300
MOTOR
AI contour control AICC I (AICC II)
Spindle motor power(Cont. / 30min) kW 7.5 / 11(15 / 18.5)
X/Y/Z feed motor kW 3/3/4
Coolant pump motor(50Hz/60Hz) kW 0.53+0.85/0.75+1.27
OTHERS
Air supply kg/cm² 5.5
Machine dimension L x W x H m 2.7 x 2.2 x 3
Net weight kg 7000



NO. STANDARD ACCESSORIES NO. OPTIONAL ACCESSORIES
1 FANUC 0i-M controller + AICC I 1 Data server 2G
2 RS-232 interface 2 Linear scale (Heidenhain)
3 Rigid tapping 3 Contact tool setter
4 Heat exchanger for electric cabinet 4 Workpiece touch probe
5 8.4" Colored LCD monitor 5 Air cooler for electric cabinet
6 Lubrication system 6 Spindle speed upgrading
7 4-bar coolant system 7 Upgrade to 10.4" Colored LCD monitor
8 Cutter air blast 8 20 bar coolant through spindle system
9 Spray gun 9 Oil-coolant skimmer
10 Three-color warning light 10 Oil mist collector
11 Spindle oil cooling system 11 4th axis interface + FANUC motor & driver
12 4th axis rotary table
13 2-step gear box
14 Z-axis travel 740mm
15 Automatic door
16 Chain type chip conveyor + chip cart
17 Transformer
18 CE version
19 AICC II
20 Spindle air blow tube
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the
 machine without prior notice. All the specifications shown above are just for reference.

Related Products

Vertical Machining Center

UM-120B

Vertical Machining Center

UM-220

Vertical Machining Center

UM-85

Vertical Machining Center

UM-130

Vertical Machining Center

UM-60

Vertical Machining Center

UM-110