UM-160S

Vertical Machining Center



· Increased capacity, improved capacity and better all around performance.

· Heavy-duty linear guide ways in all three axes.

· 24-station, swing-arm automatic tool changer .

· Spindle speed 10000 (12000) rpm

· Belt driven spindle design

· Table dimension: 1700 x 880 mm

· FANUC 0i-M controller with LCD monitor

	ITEM/MODEL		UM-160S
	Controller		FANUC 0i-M
	SPINDLE
	Spindle speed	rpm	10000(12000)
	Spindle nose taper		BT40
	Bearing inner diameter	mm	70
	Drive system		Belt(Direct)
	TRAVELS
	X-axis travel	mm	1600
	Y-axis travel	mm	850
	Z-axis travel	mm	850
	Spindle nose to table	mm	150~1000
	TABLE
	Table dimension	mm	1700 x 950
	T-slot(No. of T-slot x width x pitch)	mm	7 x 18 x 120
	Max. weight on table	kg	2000
	FEED RATES
	X-axis Rapid Traverse Rate	m / min	30
	Y-axis Rapid Traverse Rate	m / min	30
	Z-axis Rapid Traverse Rate	m / min	30
	Cutting feed rate	m / min	12
	Ball screw diameter (X/Y/Z)	mm	50/50/50
	Guideway type		Roller
	AUTOMATIC TOOL CHANGE SYSTEM
	Tool magazine capacity	pcs	24(30/32)
	Max. tool weight	kg	7
	Max. tool diameter	mm	80
	Max. tool diameter without adjacent tools	mm	150
	Method of tool exchange		Arm type
	Max. tool length	mm	300
	MOTOR
	AI contour control		AICC I (AICC II)
	Spindle motor power(Cont. / 30min)	kW	15 / 18.5
	X/Y/Z feed motor	kW	4/4/7
	Coolant pump motor(50Hz/60Hz)	kW	0.53+0.85/0.75+1.27
	OTHERS
	Air supply	kg/cm²	5.5
	Machine dimension L x W x H	m	4.4 x 3.2 x 3.2
	Net weight	kg	14000

	NO.	STANDARD ACCESSORIES	NO.	OPTIONAL ACCESSORIES
	1	FANUC 0i-M controller + AICC I	1	Data server 2G
	2	RS-232 interface	2	Linear scale (Heidenhain)
	3	Rigid tapping	3	Contact tool setter
	4	Heat exchanger for electric cabinet	4	Workpiece touch probe
	5	8.4" Colored LCD monitor	5	Air cooler for electric cabinet
	6	Lubrication system	6	Spindle speed upgrading
	7	4-bar coolant system	7	Upgrade to 10.4" Colored LCD monitor
	8	Cutter air blast	8	20 bar coolant through spindle system
	9	Spray gun	9	Oil-coolant skimmer
	10	Three-color warning light	10	Oil mist collector
	11	Spindle oil cooling system	11	4th axis interface + FANUC motor & driver
			12	4th axis rotary table
			13	2-step gear box
			14	Automatic door
			15	Chain type chip conveyor + chip cart
			16	Transformer
			17	CE version
			18	AICC II
			19	Spindle air blow tube

The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the
 machine without prior notice. All the specifications shown above are just for reference.