UM-130W
Vertical Machining Center
Vertical Machining Center
· Increased capacity, improved capacity and better all around performance.
· Heavy-duty linear guide ways in all three axes.
· 24-station, swing-arm automatic tool changer .
· High speed 6000 rpm
· Belt driven spindle design
· Table dimension: 1500 x 650 mm
· FANUC 0i-M controller with LCD monitor
|
|
ITEM/MODEL | UM-130W | |
|---|---|---|---|
|
|
Controller | FANUC 0i-M | |
|
|
SPINDLE | ||
|
|
Spindle speed | rpm | 6000 |
|
|
Spindle nose taper | BT50 | |
|
|
Bearing inner diameter | mm | 90 |
|
|
Drive system | Belt | |
|
|
TRAVELS | ||
|
|
X-axis travel | mm | 1300 |
|
|
Y-axis travel | mm | 650 |
|
|
Z-axis travel | mm | 550 |
|
|
Spindle nose to table | mm | 150~700 |
|
|
TABLE | ||
|
|
Table dimension | mm | 1500 x 650 |
|
|
T-slot(No. of T-slot x width x pitch) | mm | 5 x 18 x 100 |
|
|
Max. weight on table | kg | 1500 |
|
|
FEED RATES | ||
|
|
X-axis Rapid Traverse Rate | m / min | 30 |
|
|
Y-axis Rapid Traverse Rate | m / min | 30 |
|
|
Z-axis Rapid Traverse Rate | m / min | 30 |
|
|
Cutting feed rate | m / min | 12 |
|
|
Ball screw diameter (X/Y/Z) | mm | 45/45/45 |
|
|
Guideway type | Roller | |
|
|
AUTOMATIC TOOL CHANGE SYSTEM | ||
|
|
Tool magazine capacity | pcs | 24(32) |
|
|
Max. tool weight | kg | 15 |
|
|
Max. tool diameter | mm | 110 |
|
|
Max. tool diameter without adjacent tools | mm | 200 |
|
|
Method of tool exchange | Arm type | |
|
|
Max. tool length | mm | 300 |
|
|
MOTOR | ||
|
|
AI contour control | AICC I | |
|
|
Spindle motor power(Cont. / 30min) | kW | 15 / 18.5 |
|
|
X/Y/Z feed motor | kW | 4/4/7 |
|
|
Coolant pump motor(50Hz/60Hz) | kW | 0.53+0.85/0.75+1.27 |
|
|
OTHER | ||
|
|
Air supply | kg/cm² | 5.5 |
|
|
Machine dimension L x W x H | m | 3.3 x 2.7 x 3.0 |
|
|
Net weight | kg | 9000 |
|
|
NO. | STANDARD ACCESSORIES | NO. | OPTIONAL ACCESSORIES |
|---|---|---|---|---|
|
|
1 | FANUC 0i-M controller + AICC I | 1 | Data server 2G |
|
|
2 | RS-232 interface | 2 | Linear scale (Heidenhain) |
|
|
3 | Rigid tapping | 3 | Contact tool setter |
|
|
4 | Heat exchanger for electric cabinet | 4 | Spindle speed upgrading |
|
|
5 | Spindle oil cooling system | 5 | Spindle air blow tube |
|
|
6 | 8.4" Colored LCD monitor | 6 | Upgrade to 10.4" Colored LCD monitor |
|
|
7 | Lubrication system | 7 | 20 bar coolant through spindle system |
|
|
8 | 4-bar coolant system | 8 | Oil-coolant skimmer |
|
|
9 | Cutter air blast | 9 | Oil mist collector |
|
|
10 | Spray gun | 10 | 4th axis interface + FANUC motor & driver |
|
|
11 | Three-color warning light | 11 | 4th axis rotary table |
|
|
12 | Automatic door | ||
|
|
13 | Chain type chip conveyor + chip cart | ||
|
|
14 | Transformer | ||
|
|
15 | CE version | ||
|
|
16 | 2-step gear box | ||
|
|
17 | Z-axis travel 740mm |
