UT-360L
High Performance Turning Center
Heavy Duty and Cutting Machine Tool with High Precision MT-6 Tailstock
· Cam-driven hydraulic/servo turret with 12 station
· One-piece bed, 30° slant-bed structural design
· Max. Swing: 750 mm
· Max. Length: 1130 mm
· Spindle: A2-8 in 2700 rpm
· Bar capacity: 90 mm
· 8.4"Fanuc 0i controller with color LCD monitor
· Cam-driven hydraulic/servo turret with 12 station
· One-piece bed, 30° slant-bed structural design
· Max. Swing: 750 mm
· Max. Length: 1130 mm
· Spindle: A2-8 in 2700 rpm
· Bar capacity: 90 mm
· 8.4"Fanuc 0i controller with color LCD monitor
|
|
ITEM/MODEL | UT-360L |
|
||||
|---|---|---|---|---|---|---|---|
|
|
Controller | FANUC 0i-T | |||||
|
|
CAPACITY | ||||||
|
|
Swing over bed | mm | 750 | ||||
|
|
Swing over saddle | mm | 600 | ||||
|
|
Max.Spindle turning diameter | mm | 550 | ||||
|
|
Max. turning length | mm | 1130 |
|
|||
|
|
Guide way type | Box | |||||
|
|
SPINDLE | ||||||
|
|
Spindle Nose | ASA | A2-8(A2-11) | ||||
|
|
Chuck Diameter | inch | 12(15) | ||||
|
|
Spindle hole diameter | mm | 101(116/131) | ||||
|
|
Spindle Speed | rpm | 2700(2500/2000) | ||||
|
|
Spindle Motor Power(Cont. /30min) | kW | 18.5/22(30/37) | ||||
|
|
Bar Capacity | mm | 90(105/116.5) | ||||
|
|
TRAVELS | ||||||
|
|
X-axis Travel | mm | 305 |
|
|||
|
|
Z-axis Travel | mm | 1250 | ||||
|
|
FEED RATES | ||||||
|
|
X-axis Rapid Traverse Rate | m/min | 20 | ||||
|
|
Z-axis Rapid Traverse Rate | m/min | 20 |
|
|||
|
|
TURRET | ||||||
|
|
Tooling system | BOT | |||||
|
|
Turret driven type | Hydraulic/servo | |||||
|
|
Number of tools | station | 12 | ||||
|
|
Square tool shank size | mm | 32 | ||||
|
|
Round tool shank size | mm | 50 | ||||
|
|
TAILSTOCK | ||||||
|
|
Tailstock body travel | 1040 | |||||
|
|
Quill travel | mm | 120 | ||||
|
|
Quill diameter | mm | 120 | ||||
|
|
Quill taper hole | MT# | 6 | ||||
|
|
DIMENSION | ||||||
|
|
Machine dimension L x W x H | m | 5.7 x 2.2 x 2.3 |
|
|||
|
|
Net weight | kg | 7000 |
|
|||
|
|
NO. | STANDARD ACCESSORIES | NO. | OPTIONAL ACCESSORIES |
|---|---|---|---|---|
|
|
1 | FANUC 0i-T controller | 1 | Upgrade to 10.4" Colored LCD monitor |
|
|
2 | RS-232 interface | 2 | Tool setter |
|
|
3 | Rigid tapping | 3 | Oil mist collector |
|
|
4 | Heat exchanger for electric cabinet | 4 | Oil-coolant skimmer |
|
|
5 | 8.4" Colored LCD monitor | 5 | Air cooler for electric cabinet |
|
|
6 | Lubrication system | 6 |
A2-11 spindle headstock and 131mm spindle through hole
|
|
|
7 | 4-bar coolant system | 7 |
A2-15 spindle headstock and 181 mm spindle through hole
|
|
|
8 | Three-color warning light | 8 | 12-station servo turret |
|
|
9 | APT50 12-station power turret | ||
|
|
10 | Steady rest | ||
|
|
11 | Gear box | ||
|
|
12 | Transformer | ||
|
|
13 | CE version | ||
|
|
14 | Linear scale |
machine without prior notice. All the specifications shown above are just for reference.
