UM-220
Vertical Machining Center
Vertical Machining Center
· Increased capacity, improved capacity and better all around performance.
· Heavy-duty linear guide ways in all three axes.
· 24-station, swing-arm automatic tool changer .
· Spindle speed 10000 rpm
· Belt driven spindle design
· Table dimension: 2350 x 1000 mm
· FANUC 0i-M controller with LCD monitor
· Increased capacity, improved capacity and better all around performance.
· Heavy-duty linear guide ways in all three axes.
· 24-station, swing-arm automatic tool changer .
· Spindle speed 10000 rpm
· Belt driven spindle design
· Table dimension: 2350 x 1000 mm
· FANUC 0i-M controller with LCD monitor
|
ITEM/MODEL | UM-220 | |
---|---|---|---|
|
Controller | HEIDENHAIN TNC 640 | |
|
SPINDLE | ||
|
Spindle speed | rpm | 10000 |
|
Spindle nose taper | BT40 | |
|
Bearing inner diameter | mm | 70 |
|
Drive system | Belt | |
|
TRAVELS | ||
|
X-axis travel | mm | 2350 |
|
Y-axis travel | mm | 1000 |
|
Z-axis travel | mm | 850 |
|
Spindle nose to table |
mm | 150~1000 |
|
TABLE | ||
|
Table dimension | mm | 2350 x 1000 |
|
T-slot(No. of T-slot x width x pitch) | mm | 8 x 18 x 120 |
|
Max. weight on table | kg | 3400 |
|
FEED RATES | ||
|
X-axis Rapid Traverse Rate | m / min | 28 |
|
Y-axis Rapid Traverse Rate | m / min | 28 |
|
Z-axis Rapid Traverse Rate | m / min | 28 |
|
Cutting feed rate | m / min | 12 |
|
Ball screw diameter (X/Y/Z) | mm | 50/50/50 |
|
Guideway type | Roller | |
|
AUTOMATIC TOOL CHANGE SYSTEM
|
||
|
Tool magazine capacity | pcs | 24(32) |
|
Max. tool weight | kg | 7 |
|
Max. tool diameter | mm | 80 |
|
Max. tool diameter without adjacent tools
|
mm | 150 |
|
Method of tool exchange | Arm type | |
|
Max. tool length | mm | 300 |
|
MOTORS | ||
|
Spindle motor power(Cont. / 30min) | kW | 17 / 46 |
|
X/Y/Z feed motor | kW | 4/4/7 |
|
Coolant pump motor(50Hz/60Hz) | kW | 0.53+0.85/0.75+1.27 |
|
OTHERS | ||
|
Air supply | kg/cm² | 5.5 |
|
Machine dimension L x W x H | m | 5.9 x 3.9 x 3.0 |
|
Net weight | kg | 20000 |
|
NO. | STANDARD ACCESSORIES | NO. | OPTIONAL ACCESSORIES |
---|---|---|---|---|
|
1 | FANUC 0i-M controller + AICC I | 1 | Data server 2G |
|
2 | RS-232 interface | 2 | Linear scale (Heidenhain) |
|
3 | Rigid tapping | 3 | Contact tool setter |
|
4 | Heat exchanger for electric cabinet | 4 | Spindle speed upgrading |
|
5 | Spindle oil cooling system | 5 | Spindle air blow tube |
|
6 | 8.4" Colored LCD monitor | 6 | Upgrade to 10.4" Colored LCD monitor |
|
7 | Lubrication system | 7 | 20 bar coolant through spindle system |
|
8 | 4-bar Coolant system | 8 | Oil-coolant skimmer |
|
9 | Cutter air blast | 9 | Oil mist collector |
|
10 | Spray gun | 10 | 4th axis interface + FANUC motor & driver |
|
11 | Three-color warning light | 11 | 4th axis rotary table |
|
|
12 | Automatic door | |
|
|
13 | Chain type chip conveyor for both sides of X axis | |
|
14 | Transformer | ||
|
15 | CE version | ||
|
|
|||
|
|
|
||
|
|
|
||
|
|
machine without prior notice. All the specifications shown above are just for reference.