• UM-60
  • UM-60
  • UM-60
  • UM-60
  • UM-60

UM-60

Vertical Machining Center

Vertical Machining Center

  • Best for machining small and precision dies and molds.
  • 24-station, swing-arm automatic tool changer .
  • Spindle speed 10000(12000) rpm
  • Belt driven spindle design
  • Table dimension: 750 x 560 mm
  • FANUC 0i controller with LCD monitor.
  • Linear guides on all axis.
ITEM/MODEL UM-60
Controller FANUC 0i-M
SPINDLE
Spindle speed rpm 10000(12000)
Spindle nose taper - BT40
Bearing inner diameter mm 70
Drive system - Belt(Direct)
TRAVELS
X-axis travel mm 600
Y-axis travel mm 510
Z-axis travel mm 510
Spindle nose to table mm 150~660
TABLE
Table dimension mm 750 x 560
T-slot(No. of T-slot x width x pitch) mm 5 x 18 x 100
Max. weight on table kg 750
FEED RATES
X-axis Rapid Traverse Rate m / min 36
Y-axis Rapid Traverse Rate m / min 36
Z-axis Rapid Traverse Rate m / min 30
Cutting feed rate m / min 12
Ball screw diameter(X/Y/Z) mm 40/40/40
Guideway type Ball
AUTOMATIC TOOL CHANGE SYSTEM
Tool magazine capacity pcs 24
Max.tool weight kg 7
Max.tool diameter mm 80
Max.tool diameter without adjacent tools mm 150
Method of tool exchange - Arm type
Max. tool length mm 300
MOTOR
AI contour control AICC I (AICC II)
Spindle motor power(Cont. / 30min) kW 7.5 / 11
X/Y/Z feed motor kW 3/3/4
Coolant pump motor(50Hz/60Hz) kW 0.53+0.85/0.75+1.27
OTHERS
Air supply kg/cm² 5.5
Machine dimension L x W x H m 2 x 2.6 x 2.8
Net weight kg 5000


NO. STANDARD ACCESSORIES NO. OPTIONAL ACCESSORIES
1 FANUC 0i-M controller +AICC I 1 Data server 2G
2 RS-232 interface 2 Linear scale (Heidenhain)
3 Rigid tapping 3 Contact tool setter
4 Heat exchanger for electric cabinet 4 Workpiece touch probe
5 8.4" Colored LCD monitor 5 Roller type guide way
6 Lubrication system 6 Air cooler for electric cabinet
7 4-bar coolant system 7 Spindle speed upgrading
8 Cutter air blast 8 Upgrade to 10.4" Colored LCD monitor
9 Spray gun 9 20 bar coolant through spindle system
10 Three-color warning light 10 Oil-coolant skimmer
11 Spindle oil cooling system 11 Oil mist collector
12 4th axis interface + FANUC motor & driver
13 4th axis rotary table
14 Automatic door       
15 Chain type chip conveyor + chip cart
16 Transformer
17 CE version
18 Spindle air blow tube
19 AICC II

Related Products

Vertical Machining Center

UM-85

Vertical Machining Center

UM-85H

Vertical Machining Center

UM-75

Vertical Machining Center

UM-150

Vertical Machining Center

UM-110

Vertical Machining Center

UM-130