UT-200LM

Best Structural Reliability and High Precision Machining

 

· Gear-driven BMT/VDI live tool turret with 12 station

· One-piece bed, 45° slant-bed structural design

· Max. Swing:  505 mm

· Max. Length:  880  mm

· Spindle:  A2-6 in  4500 rpm

· Bar capacity:  52 mm

· 8.4"Fanuc 0i controller with color LCD monitor

	ITEM/MODEL		UT-200LM
	Controller		FANUC 0i-T
	CAPACITY
	Swing over bed	mm	505
	Swing over saddle	mm	318
	Max. turning diameter	mm	260
	Max. turning length	mm	880
	slant saddle	degree	45
	Guide way type		Box
	SPINDLE
	Spindle nose taper	ASA	A2-6(A2-5/A2-8)
	Chuck diameter	inch	8(6/10)
	Spindle hole diameter	mm	62(56/76/86)
	Spindle speed	rpm	4500(6000/4000/3500)
	Spindle motor power(Cont. / 30min)	kW	11/15(15/18.5)
	Bar capacity	mm	52(44/65/75)
	TRAVELS
	Z-axis Travel	mm	1050
	X-axis Travel	mm	220
	FEED RATES
	Z-axis Rapid Traverse Rate	m/min	20
	X-axis Rapid Traverse Rate	m/min	20
	TURRET
	Tooling system		BMT(VDI)
	Turret driven type		Servo mechanical
	Number of tools	station	12
	Square tool shank size	mm	20
	Round tool shank size	mm	32
	Max. roatry tool speed	rpm	6000
	Rotary tool motor power	kW	4.5
	TAILSTOCK
	Tailstock body travel	mm	1045
	Quill travel	mm	80
	Quill diameter	mm	75
	Quill taper	MT#	4
	DIMENSION
	Machine dimension L x W x H	m	3.7 x 1.6 x 1.9
	Net weight	kg	4750

	NO.	STANDARD ACCESSORIES	NO.	OPTIONAL ACCESSORIES
	1	FANUC 0i-T controller	1	Upgrade to 10.4" Colored LCD monitor
	2	RS-232 interface	2	Collet chuck
	3	Rigid tapping	3	Tool setter
	4	Heat exchanger for electric cabinet	4	Parts catcher and parts conveyor
	5	8.4" Colored LCD monitor	5	Bar feeder interface (7 or 24 pins)
	6	Lubrication system	6	Bar feeder
	7	4-bar coolant system	7	Oil mist collector
	8	Three-color warning light	8	Oil-coolant skimmer
			9	Air cooler for electric cabinet
			10	Transformer
			11	CE version
			12	Loader interface
			13	Gantry loader system
			14	Axial rotary tool holder
			15	Radial rotary tool holder
			16	Automatic door
			17	Linear scale

The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without prior notice. All the specifications shown above are just for reference.

High Quality Meehanite Casting
A heavily ribbed and reinforced one piece Meehanite casting highly reduce the chances of bending and deformation. The UT-200 series is equipped with a 45° slant bed. 

Designed for Stability
In order to achieve a high standard of machine stability and provide the best machining performance, the base in these machines is designed to have a low center of gravity.

Wide Hardened Boxways
Another high standard aspect is the unique process for induction-hardened and heat treated wide boxways . They are also precision ground to match stringent positioning and repetitive accuracy under various machining requirements. 

Expert Hand Scraping
To get the most precise positioning and extend their service life to the maximum, all sliding surfaces are treated with extreme care and proficiency. First, they are coated with a layer of  Turcite B and then hand-scraped to create the perfect lubricant retention. 
During assembly, professional experts will constantly check and adjust the surfaces flatness, squareness, and straightness and make sure to deliver the best static geometrical accuracy.

Precision Assurance
Prior to assembly, all key components will go through a series of functional and dimensional checks using CMM system ensuring they are up to standards. 

Rigid Shock Absorbing Headstock
To eliminate remaining internal stress arising from casting process, headstocks are naturally seasoned as well as heat treated and annealed twice before precision finishing grinding. They are specially designed to resist cutting force and withstand the extreme demands of continues heavy-duty and step cutting.

Headstock Performance
One of the best headstock design features is the symmetrically placed heat dissipating ribs. They allow the cooling process to take place smoothly and evenly. This minimizes thermal deformation and helps maintaining the circularity and concentricity to achieve the high precision that customers expect.

Precision In-house Spindle Assembly
Precision belt drive spindles are custom designed and assembled in-house to provide unsurpassed power, long term durability, and peak machining capability.
Each spindle undergoes a dynamic balancing operation to reduce the vibration increasing the machine performance and overall quality.

Ballscrew Drive Mechanism
State-of-the-art larger AC servo motors are equipped to provide powerful thrust for high feed rates and accurate cutting. Therefore, large diameter pre-tensioned precision ballscrews are directly connected to the drive mechanism for a backlash free movement.

Precision In-house Turret Assembly
All turrets are built in-house with care offering both cam-follower driven hydraulic and servo driven indexing mechanisms. BMT turret is provided as an option as well, covering a wider range of availabilities for clients.

Programmable Tailstock
The tailstocks in the UT series machines can be either manually or automatically controlled. They are located on the same one-piece cast guideway surface aligned with the headstock and main spindle. The UT-200 has a manually controlled tailstock by default and can be upgraded to a programmable one on demand.