• Slant Bed Linear Way CNC Lathe-JT-200PL
  • Slant Bed Linear Way CNC Lathe-JT-200PL
  • Slant Bed Linear Way CNC Lathe-JT-200PL

JT-200PL

Slant Bed Linear Way CNC Lathe

Best Structural Reliability and High Precision Linear Way Performance



· Cam-driven/Gear-driven - hydraulic/servo turret with 8/10/12 station

· One-piece bed, 45° slant-bed structural design

· Max. Swing:  505 mm

· Max. Length:  1000  mm

· Spindle:  A2-5/A2-6 in  6000/4500 rpm

· Bar capacity:  44 mm

· 8.4"Fanuc 0i controller with color LCD monitor
ITEM/MODEL JT-200PL

Controller FANUC 0i-T
CAPACITY
Swing over bed mm 505
Swing over saddle mm 318
Max. turning diameter mm 280
Max. turning length mm 1000


slant saddle degree 45
Guide way type Linear
SPINDLE
Spindle nose taper ASA A2-6(A2-5/A2-8)
Chuck diameter inch 8(6/10)
Spindle hole diameter mm 62(56/76/86)
Spindle speed rpm 4500(6000/4000/3500)
Spindle motor power(Cont. / 30min) kW 11/15(15/18.5)
Bar capacity mm 52(44/65/75)
TRAVELS
Z-axis Travel mm 1050

X-axis Travel mm 220
FEED RATES
Z-axis Rapid Traverse Rate m/min 30
X-axis Rapid Traverse Rate m/min 30
TURRET
Tooling system BOT
Turret driven type Hydraulic(Servo)
Number of tools station 8/10(12)
Square tool shank size mm 25(20)
Round tool shank size mm 32
TAILSTOCK
Tailstock body travel mm 1045

Quill travel mm 80
Quill diameter mm 75
Quill taper MT# 4
DIMENSION
Machine dimension L x W x H m 3.7 x 1.6 x 1.8


Net weight kg 4700




NO. STANDARD ACCESSORIES NO. OPTIONAL ACCESSORIES
1 FANUC 0i-T controller 1 Upgrade to 10.4" Colored LCD monitor
2 RS-232 interface 2 Collet chuck
3 Rigid tapping 3 Tool setter
4 Heat exchanger for electric cabinet 4 Parts catcher and parts conveyor
5 8.4" Colored LCD monitor 5 Bar feeder interface (7 or 24 pins)
6 Lubrication system 6 Bar feeder
7 4-bar coolant system 7 Oil mist collector
8 Three-color warning light 8 Oil-coolant skimmer
9 Air cooler for electric cabinet
10 Transformer
11 CE version
12 Loader interface
13 Gantry loader system
14 Automatic door
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the
 machine without prior notice. All the specifications shown above are just for reference.
45°Slant Bed Design
The integral type lathe bed makes the machine more rigid and stable. The 45 degree slant bed is very convenient to discharge chips.

Belt Type Driven Spindle
Spindle is supported by a double row of taper roller bearings in the front and rear side to resist axial cutting force, while self-alignment angular contact bearings provide tremendous radial load capacity. Precise balance is performed on each spindle to reduce the vibration and runout by enhancing performance and overall quality.

Skilled Hand Scraping Process
During assembly process, flatness, perpendicularity and straightness is regularly checked and skilled hand scrapped to deliver the excellent geometry accuracy that Accuway lathes are renowned for.

High-Precision Linear Guide Way Design
Linear guide way design provides low friction coefficient, and minimize the difference between dynamic and static friction. Therefore, the stick-slip will not occur during sub-micron feeding.

Ballscrew Drive Mechanism
Oversized AC servo motors are used to deliver powerful thrust for high feedrates and accurate cutting. Large diameter pre-tensioned precision ballscrews are directly connected to the drive mechanism for nearly backlash free movement.

Programmable Tailstock
The tailstocks on the JT series machines can be either manually or automatically programmable controlled.
They are located on the same one-piece cast guideway surface as the headstock and main spindle.

Precision In-house Turret Assembly
All turrets are built with robust design and both hydraulic and servo-mechanical power turrets are available to cover a wide range of application including an optional BMT turret.

Related Products

Slant Bed Linear Way CNC Lathe

JT-200M

Slant Bed Linear Way CNC Lathe

JT-200

Slant Bed Linear Way CNC Lathe

JT-200P