JT-200P

Best Structural Reliability and High Precision Linear Way Performance



· Cam-driven/Gear-driven - hydraulic/servo turret with 8/10/12 station

· One-piece bed, 45° slant-bed structural design

· Max. Swing:  505 mm

· Max. Length:  570/510  mm

· Spindle:  A2-5/A2-6 in  6000/4500 rpm

· Bar capacity:  44 mm

· 8.4"Fanuc 0i controller with color LCD monitor

	ITEM/MODEL		JT-200P
	Controller		FANUC 0i-T
	CAPACITY
	Swing over bed	mm	505
	Swing over saddle	mm	318
	Max. turning diameter	mm	280
	Max. turning length	mm	570
	slant saddle	degree	45
	Guide way type		Linear
	SPINDLE
	Spindle nose taper	ASA	A2-6(A2-5/A2-8)
	Chuck diameter	inch	8(6/10)
	Spindle hole diameter	mm	62(56/76/86)
	Spindle speed	rpm	4500(6000/4000/3500)
	Spindle motor power(Cont. / 30min)	kW	11/15(15/18.5)
	Bar capacity	mm	52(44/65/75)
	TRAVELS
	Z-axis Travel	mm	600
	X-axis Travel	mm	220
	FEED RATES
	Z-axis Rapid Traverse Rate	m/min	30
	X-axis Rapid Traverse Rate	m/min	30
	TURRET
	Tooling system		BOT
	Turret driven type		Hydraulic/Servo
	Number of tools	station	8/10(12)
	Square tool shank size	mm	25(20)
	Round tool shank size	mm	32
	TAILSTOCK
	Tailstock body travel	mm	545
	Quill travel	mm	80
	Quill diameter	mm	75
	Quill taper	MT#	4
	DIMENSION
	Machine dimension L x W x H	m	2.9 x 1.6 x 1.8
	Net weight	kg	3600

	NO.	STANDARD ACCESSORIES	NO.	OPTIONAL ACCESSORIES
	1	FANUC 0i-T controller	1	Upgrade to 10.4" Colored LCD monitor
	2	RS-232 interface	2	Collet chuck
	3	Rigid tapping	3	Tool setter
	4	Heat exchanger for electric cabinet	4	Parts catcher and parts conveyor
	5	8.4" Colored LCD monitor	5	Bar feeder interface (7 or 24 pins)
	6	Lubrication system	6	Bar feeder
	7	4-bar coolant system	7	Oil mist collector
	8	Three-color warning light	8	Oil-coolant skimmer
			9	Air cooler for electric cabinet
			10	Transformer
			11	CE version
			12	Loader interface
			13	Gantry loader system
			14	Automatic door

The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without prior notice. All the specifications shown above are just for reference.

45°Slant Bed Design
The integral type lathe bed makes the machine more rigid and stable. The 45 degree slant bed is very convenient to discharge chips.

Belt Type Driven Spindle
Spindle is supported by a double row of taper roller bearings in the front and rear side to resist axial cutting force, while self-alignment angular contact bearings provide tremendous radial load capacity. Precise balance is performed on each spindle to reduce the vibration and runout by enhancing performance and overall quality.

Skilled Hand Scraping Process
During assembly process, flatness, perpendicularity and straightness is regularly checked and skilled hand scrapped to deliver the excellent geometry accuracy that Accuway lathes are renowned for.

High-Precision Linear Guide Way Design
Linear guide way design provides low friction coefficient, and minimize the difference between dynamic and static friction. Therefore, the stick-slip will not occur during sub-micron feeding.

Ballscrew Drive Mechanism
Oversized AC servo motors are used to deliver powerful thrust for high feedrates and accurate cutting. Large diameter pre-tensioned precision ballscrews are directly connected to the drive mechanism for nearly backlash free movement.

Programmable Tailstock
The tailstocks on the JT series machines can be either manually or automatically programmable controlled.
They are located on the same one-piece cast guideway surface as the headstock and main spindle.

Precision In-house Turret Assembly
All turrets are built with robust design and both hydraulic and servo-mechanical power turrets are available to cover a wide range of application including an optional BMT turret.