GL-12
Compact and Economical Gang Type CNC Lathe
Compact and Economical Gang Type CNC Lathe
· Super-fast tool change and no turret indexing
· Max. Swing: 350 mm
· Max. Length: 200 mm
· Spindle: A2-5 in 6000 rpm
· Bar capacity: 44 mm
· 8.4"Fanuc 0i controller with color LCD monitor
· Super-fast tool change and no turret indexing
· Max. Swing: 350 mm
· Max. Length: 200 mm
· Spindle: A2-5 in 6000 rpm
· Bar capacity: 44 mm
· 8.4"Fanuc 0i controller with color LCD monitor
|
|
ITEM/MODEL | GL-12 | |
|---|---|---|---|
|
|
Controller | FANUC 0i-T | |
|
|
Swing over bed | mm | 350 |
|
|
Max. turning diameter | mm | 100 |
|
|
Max. turning length | mm | 200 |
|
|
Guide way type |
|
Box |
|
|
SPINDLE | ||
|
|
Spindle nose | ASA | A2-5(A2-6) |
|
|
Chuck diameter | inch | 6(8) |
|
|
Spindle hole diameter | mm | 56(62/76) |
|
|
Spindle speed | rpm | 6000(4500/4000) |
|
|
Spindle motor power(Cont. / 30min) | kW | 7.5/11 |
|
|
Bar capacity | mm | 44(52/65) |
|
|
TRAVELS |
|
|
|
|
Z-axis Travel |
mm | 250 |
|
|
X-axis Travel |
mm | 600 |
|
|
FEED RATES | ||
|
|
Z-axis Rapid Traverse Rate | m/min | 10 |
|
|
X-axis Rapid Traverse Rate | m/min | 10 |
|
|
TURRET | ||
|
|
Turret Drive Type | mm | Gang |
|
|
Square tool shank size | mm | 20 |
|
|
Round tool shank size | mm | 32 |
|
|
OTHERS | ||
|
|
Machine dimension L x W x H | m | 2.3 x 2.0 x 1.85 |
|
|
Net weight | kg | 2300 |
|
|
NO. | STANDARD ACCESSORIES | NO. | OPTIONAL ACCESSORIES |
|---|---|---|---|---|
|
|
1 | FANUC 0i-T controller | 1 | Upgrade to 10.4" Colored LCD monitor |
|
|
2 | 8.4" Colored LCD monitor | 2 | Collet chuck |
|
|
3 | RS-232 interface | 3 | Parts catcher and parts conveyor |
|
|
4 | Heat exchanger for electric cabinet | 4 | Bar feeder interface (7 or 24 pins) |
|
|
5 | Lubrication system | 5 | Bar feeder |
|
|
6 | 4-bar coolant system | 6 | Oil mist collector |
|
|
7 | Three-color warning light | 7 | Oil-coolant skimmer |
|
|
8 | Tool kit | 8 | Air cooler for electric cabinet |
|
|
9 | Transformer | ||
|
|
10 | CE version | ||
|
|
11 | Automatic door | ||
|
|
12 | Robot Interface |
All major components of the machine are made of high quality cast iron that is tempered to eliminate internal stress.
Each slide-way is hardened by high-frequency heat treatment and ground to ensure the high rigidity and long service live.
Gang type CNC lathe offers super-fast tool change and requires no turret indexing, thereby ensuring drastically increased machining productivity.
The floor space required to accommodate the machine is only 2.3m x 2m.
Chip conveyor can be located on the right side or at the back of the machine.
Space-saving design and easy installation make GL-12 suitable for any workshop.
Each slide-way is hardened by high-frequency heat treatment and ground to ensure the high rigidity and long service live.
Gang type CNC lathe offers super-fast tool change and requires no turret indexing, thereby ensuring drastically increased machining productivity.
The floor space required to accommodate the machine is only 2.3m x 2m.
Chip conveyor can be located on the right side or at the back of the machine.
Space-saving design and easy installation make GL-12 suitable for any workshop.