• 5 Axes Vertical Machining Center-UM-500
  • 5 Axes Vertical Machining Center-UM-500
  • 5 Axes Vertical Machining Center-UM-500
  • 5 Axes Vertical Machining Center-UM-500
  • 5 Axes Vertical Machining Center-UM-500
  • 5 Axes Vertical Machining Center-UM-500


5 Axes Vertical Machining Center

5 Axes Vertical Machining Center


· Meehanite cast structure keeps long-term accuracy.

· Rotary table and integral 5 axes motion saddle.

· MANUAL GUIDE i 3D movement tool route graphic coordinate display. 

· Spindle Speed : 12000(15000) rpm

· Max. workpiece : Ø500 x 300 mm
Controller FANUC 0i-M
Spindle speed rpm 12000(15000)
Spindle nose taper BT40
Bearing inner diameter mm 70
Drive system Direct
X-axis travel mm 1000
Y-axis travel mm 650
Z-axis travel mm 550
A-axis travel degree -120 / +30
C-axis travel degree 360
Max. speed of rotary axis (C-axis) rpm 16.6
Max. speed of tilting axis (A-axis) rpm 11.1
Max. table loading at 0° kg 300
Max. table loading at 90° kg 250
Spindle nose to table -130~420
Table dimension mm Ø600 / □ 500
Max. workpiece size mm Ø500 x 300
T-slot size mm 14
X-axis Rapid Traverse Rate m / min 30
Y-axis Rapid Traverse Rate m / min 30
Z-axis Rapid Traverse Rate m / min 30
Cutting feed rate m / min 12
Ball screw diameter (X/Y/Z) mm 45/45/45
Guideway type Roller
Tool magazine capacity pcs 24(32/40)
Max. tool weight kg 7
Max. tool diameter mm 80
Max. tool diameter without adjacent tools
mm 150
Method of tool exchange Arm type
Max. tool length mm 300
Spindle motor power(Cont. / 30min) kW 7.5 / 11
X/Y/Z feed motor kW 4/4/7
Coolant pump motor(50Hz/60Hz) kW 0.53+0.85/0.75+1.27
Air supply kg/cm² 5.5
Machine dimension L x W x H m 3 x 2.2 x 3.2
Net weight kg 9000

1 FANUC 0i-M controller + AICC I 1 Data server 2G
2 RJ-45 interface 2 Linear scale (Heidenhain)
3 Rigid tapping 3 Contact tool setter
4 Heat exchanger for electric cabinet 4 Workpiece touch probe
5 8.4" Colored LCD monitor 5 Air cooler for electric cabinet
6 Lubrication system 6 Spindle speed upgrading
7 4-bar coolant system 7 Upgrade to 10.4" Colored LCD monitor
8 Cutter air blast 8 20 bar coolant through spindle system
9 Spray gun 9 Oil-coolant skimmer
10 Three-color warning light 10 Oil mist collector
11 Spindle oil cooling system 11 Automatic door
12 Chain type chip conveyor + chip cart
13 Transformer  
14 CE version
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without prior notice. All the specifications shown above are just for reference.
High-Rigidity Frame Structure
High toughness Meehanite cast structure makes stable form and keeps long-term accuracy.
The standard table was replaced with a dual-axis trunnion table to provide 5-axis simultaneous motion, or position workpiece to almost any angle for 5-sided machining.
The rotary table provides -120 degrees to +30 degrees of tilt on the A axis and 360 degrees of continuous rotation on the C axis.
It accommodates parts and fixture weighing up to 200 kgs under 350 mm of table diameter.

High-Precision Tool Changing System
Tool magazine has a capacity of 24 tools, fitted with quick and accurate automatic tool changing mechanism. Tool change requires only two to three seconds, which saves cutting time and augments work efficiency.
PLC program design can manage a tool change for large diameter cutting tool inside the tool magazine.

Related Products

5 Axes Vertical Machining Center


5 Axes Vertical Machining Center