U-25
5 Axes Vertical Machining Center
5 Axes Vertical Machining Center
· Meehanite cast structure keeps long-term accuracy.
· Rotary table and integral 5 axes motion saddle.
· MANUAL GUIDE i 3D movement tool route graphic coordinate display.
· Spindle Speed : 12000 rpm
· Max. workpiece : Ø250 x 200 mm
· Meehanite cast structure keeps long-term accuracy.
· Rotary table and integral 5 axes motion saddle.
· MANUAL GUIDE i 3D movement tool route graphic coordinate display.
· Spindle Speed : 12000 rpm
· Max. workpiece : Ø250 x 200 mm
|
ITEM/MODEL | UM-25 | |
---|---|---|---|
|
Controller | FANUC 0i-M | |
|
SPINDLE | ||
|
Spindle speed | rpm | 12000(15000) |
|
Spindle nose taper | BT40 | |
|
Bearing inner diameter | mm | 70 |
|
Drive system | Direct | |
|
TRAVELS | ||
|
X-axis travel | mm | 500 |
|
Y-axis travel | mm | 400 |
|
Z-axis travel | mm | 550 |
|
A-axis travel | degree | -120 / +30 |
|
C-axis travel | degree | 360 |
|
TABLE | ||
|
Max. speed of rotary axis (C-axis) | rpm | 100 |
|
Max. speed of tilting axis (A-axis) | rpm | 50 |
|
Max. table loading at 0° | kg | 60 |
|
Max. table loading at 90° | kg | 50 |
|
Spindle nose to table | mm | 100~650 |
|
Table dimension | mm | Ø250 |
|
Max. workpiece size | mm | Ø250 x 200 |
|
T-slot size | mm | 12 |
|
FEED RATES | ||
|
X-axis Rapid Traverse Rate | m / min | 32 |
|
Y-axis Rapid Traverse Rate | m / min | 32 |
|
Z-axis Rapid Traverse Rate | m / min | 30 |
|
Cutting feed rate | m / min | 12 |
|
Ball screw diameter (X/Y/Z) | mm | 45/45/45 |
|
Guideway type | Roller | |
|
AUTOMATIC TOOL CHANGE SYSTEM | ||
|
Tool magazine capacity | pcs | 32 |
|
Max. tool weight | kg | 7 |
|
Max. tool diameter | mm | 80 |
|
Max. tool diameter without adjacent tools
|
mm | 150 |
|
Method of tool exchange | Arm type | |
|
Max. tool length | mm | 300 |
|
MOTOR | ||
|
Spindle motor power(Cont. / 30min) | kW | 7.5 / 11 |
|
X/Y/Z feed motor | kW | 3/3/4 |
|
Coolant pump motor(50Hz/60Hz) | kW | 0.53+0.85/0.75+1.27 |
|
OTHERS | ||
|
Air supply | kg/cm² | 5.5 |
|
Machine dimension L x W x H | m | 2 x 2.5 x 3 |
|
Net weight | kg | 5000 |
|
NO. | STANDARD ACCESSORIES | NO. | OPTIONAL ACCESSORIES |
---|---|---|---|---|
|
1 | FANUC 0i-M controller +AICC I | 1 | Data server 2G |
|
2 | RS-232 interface | 2 | Linear scale (Heidenhain) |
|
3 | Rigid tapping | 3 | Contact tool setter |
|
4 | Heat exchanger for electric cabinet | 4 | Workpiece touch probe |
|
5 | 8.4" Colored LCD monitor | 5 | Air cooler for electric cabinet |
|
6 | Lubrication system | 6 | Spindle speed upgrading |
|
7 | 4-bar coolant system | 7 | Upgrade to 10.4" Colored LCD monitor |
|
8 | Cutter air blast | 8 | 20 bar coolant through spindle system /td> |
|
9 | Spray gun | 9 | Oil-coolant skimmer |
|
10 | Three-color warning light | 10 | Oil mist collector |
|
11 | Spindle oil cooling system | 11 | Automatic door |
|
12 | Chain type chip conveyor + chip cart | ||
|
13 | Transformer | ||
|
14 | CE version | ||
|
|
|||
|
|
High-Rigidity Frame Structure
High toughness Meehanite cast structure makes stable form and keeps long-term accuracy.
The standard table was replaced with a dual-axis trunnion table to provide 5-axis simultaneous motion, or position workpiece to almost any angle for 5-sided machining.
The rotary table provides -120 degrees to +30 degrees of tilt on the A axis and 360 degrees of continuous rotation on the C axis.
It accommodates parts and fixture weighing up to 200 kgs under 350 mm of table diameter.
High-Precision Tool Changing System
Tool magazine has a capacity of 24 tools, fitted with quick and accurate automatic tool changing mechanism. Tool change requires only two to three seconds, which saves cutting time and augments work efficiency.
PLC program design can manage a tool change for large diameter cutting tool inside the tool magazine.
High toughness Meehanite cast structure makes stable form and keeps long-term accuracy.
The standard table was replaced with a dual-axis trunnion table to provide 5-axis simultaneous motion, or position workpiece to almost any angle for 5-sided machining.
The rotary table provides -120 degrees to +30 degrees of tilt on the A axis and 360 degrees of continuous rotation on the C axis.
It accommodates parts and fixture weighing up to 200 kgs under 350 mm of table diameter.
High-Precision Tool Changing System
Tool magazine has a capacity of 24 tools, fitted with quick and accurate automatic tool changing mechanism. Tool change requires only two to three seconds, which saves cutting time and augments work efficiency.
PLC program design can manage a tool change for large diameter cutting tool inside the tool magazine.