sub
Your are here : HomeProducts UM-130

Vertical Machining Center

UM-60
UM-60
  UM-60H
UM-60H
  UM-85
UM-85
  UM-85H
UM-85H
  UM-110
UM-110
  UM-110H
UM-110H
  UM-130
UM-130
  UM-150
UM-150

 

UM-130 video

  • Increased capacity, improved capacity and better all around performance.
  • Heavy-duty linear guide ways in all three axes.
  • 24-station, swing-arm automatic tool changer .
  • High speed 8000/10000 rpm
  • Belt driven spindle design
  • Table dimension: 1500 x 650 mm
  • FANUC 0i-M controller with LCD monitor
Print Get Info
UM-130
UM-130
ITEM / MODEL UM-130
Controller FANUC 0i - M
SPINDLE
Spindle speed rpm 8000 (10000)
Spindle nose taper -  BT 40
Bearing inner diameter mm 70
Drive system - Belt
TRAVELS
X-axis travel mm 1300
Y-axis travel mm 650
Z-axis travel mm 550
Spindle nose to table mm 150~700
TABLE
Table dimension mm 1500 × 650
T-slot (No. of T-slot × width × pitch) mm 5 × 18 × 100
Max. weight on table kg 1500
FEED RATES
(X/ Y/ Z) Rapid traverse rate m/min 30 / 30 / 30
Cutting feed rate m/min 12
Ball screw diameter mm Ø 45
Guideway type  - Linear
AUTOMATIC TOOL CHANGE SYSTEM
Tool magazine capacity pcs 24 (32)
Max. tool weight kg 7
Max. tool diameter mm 80
Max. tool diameter without adjacent tools mm 150
Method of tool exchange - Arm type
Max. tool length mm 300
MOTOR
Spindle motor power< Cont. / 30 min> kW 15 / 18.5
X/Y/Z feed motor kW 4 / 4 / 7
Coolant pump motor<50 Hz / 60 Hz> kW 0.53 + 0.85 / 0.75 + 1.27
OTHERS
Air supply kg/cm² 5.5
Machine weight kg 9000
Machine dimension (L × W × H) m 3.3 × 2.7 × 3.0
Note: The manufacturer reserves the right to modify design and specifications of the machine without prior notice.