sub
Your are here : HomeProducts UM-110

Vertical Machining Center

UM-60
UM-60
  UM-60H
UM-60H
  UM-85
UM-85
  UM-85H
UM-85H
  UM-110
UM-110
  UM-110H
UM-110H
  UM-130
UM-130
  UM-150
UM-150

 

UM-110 video

  • Increased capacity, improved capacity and better all around performance.
  • Heavy-duty linear guide ways in all three axes.
  • 24-station, swing-arm automatic tool changer .
  • High speed 6000 / 8000 rpm
  • Belt driven spindle design
  • Table dimension: 1200 x 600 mm
  • FANUC 0i-M controller with LCD monitor.
Print Get Info
UM-110
UM-110
ITEM / MODEL UM-110 UM-110H
Controller FANUC 0i - M FANUC 31i - B
SPINDLE
Spindle speed rpm 8000 (10000) 12000 (15000)
Spindle nose taper  -  BT 40
Bearing inner diameter mm 70
Drive system - Belt Direct
TRAVELS
X-axis travel mm 1100
Y-axis travel mm 550
Z-axis travel mm 550
Spindle nose to table mm 150~700
TABLE
Table dimension mm 1200 × 600
T-slot (No. of T-slot × width × pitch) mm 5 × 18 × 100
Max. weight on table kg 1200
FEED RATES
(X/ Y/ Z) Rapid traverse rate m/min 30 / 30 / 30 42 / 42 / 30
Cutting feed rate m/min 12
Ball screw diameter mm Ø 45
Guideway type  - Linear
AUTOMATIC TOOL CHANGE SYSTEM
Tool magazine capacity pcs 24 (32)
Max. tool weight kg 7
Max. tool diameter mm 80
Max. tool diameter without adjacent tools mm 150
Method of tool exchange  - Arm type
Max. tool length mm 300
MOTOR
Spindle motor power (Cont. / 30 min) kW 7.5 / 11(15 / 18.5)
X/Y/Z feed motor kW 3 / 3 / 4
Coolant pump motor (50 Hz / 60 Hz) kW 0.53 + 0.85 / 0.75 + 1.27
OTHERS
Air supply kg/cm² 5.5
Machine weight kg 7500
Machine dimension (L × W × H) m 3.0 × 2.2 × 3.0
Note: The manufacturer reserves the right to modify design and specifications of the machine without prior notice.