sub
Your are here : HomeProducts UM-60

Vertical Machining Center

UM-60
UM-60
  UM-60H
UM-60H
  UM-85
UM-85
  UM-85H
UM-85H
  UM-110
UM-110
  UM-110H
UM-110H
  UM-130
UM-130
  UM-150
UM-150

 

UM-60

  • Best for machining small and precision dies and molds.
  • 24-station, swing-arm automatic tool changer .
  • Spindle speed 8000 / 10000 rpm
  • Belt driven spindle design
  • Table dimension: 750 x 560 mm
  • FANUC 0i controller with LCD monitor.
  • Linear guides on all axis.
Print Get Info
UM-60
UM-60
ITEM / MODEL UM-60
Controller
FANUC 0i - M
SPINDLE
Spindle speed rpm 8000 (10000)
Spindle nose taper  - BT40
Bearing inner diameter mm 70
Drive system - Belt
TRAVELS
X-axis travel mm
600
Y-axis travel mm
510
Z-axis travel mm
510
Spindle nose to table mm
150~660
TABLE
Table dimension mm
750 × 560
T-slot (No. of T-slot × width × pitch) mm
5 × 18 × 100
Max. weight on table kg
500
FEED RATES
(X/ Y/ Z) Rapid traverse rate m/min
36 / 36 / 30
Cutting feed rate m/min
12
Ball screw diameter mm
Ø 40
Guideway type  -
Linear
AUTOMATIC TOOL CHANGE SYSTEM
Tool magazine capacity pcs
24
Max. tool weight kg
7
Max. tool diameter mm
80
Max. tool diameter without adjacent tools mm
150
Method of tool exchange  -
Arm type
Max. tool length mm
300
MOTOR
Spindle motor power (Cont. / 30 min) kW
7.5 / 11
X/Y/Z feed motor kW
3 / 3 / 4
Coolant pump motor (50 Hz / 60 Hz) kW
0.53 + 0.85 / 0.75 + 1.27
OTHERS
Air supply kg/cm²
5.5
Machine weight kg
4500
Machine dimension (L × W × H) m
2.0 × 2.3 × 2.6
Note: The manufacturer reserves the right to modify design and specifications of the machine without prior notice.