sub
Your are here : HomeProducts UM-210

Vertical Machining Center

UM-110
UM-110
  UM-130
UM-130
  UM-150
UM-150
  UM-160
UM-160
  UM-180
UM-180
  UM-210
UM-210

 

UM-210

  • Increased capacity, improved capacity and better all around performance.
  • Heavy-duty linear guide ways in all three axes.
  • 24-station, swing-arm automatic tool changer .
  • High speed 6000 rpm
  • Belt driven spindle design
  • Table dimension: 1700 x 880 mm
  • FANUC 0i-M controller with LCD monitor
Print Get Info
UM-210
UM-210
ITEM / MODEL UM-210
Controller FANUC / Heidenhain
SPINDLE
Spindle speed rpm 6000
Spindle nose taper -  ISO 50
Bearing inner diameter mm 90
Drive system - 2-speed gear
TRAVELS
X-axis travel mm 2100
Y-axis travel mm 1000
Z-axis travel mm 820
TABLE
Table dimension mm 2200×1000
T-slot (No. of T-slot × width × pitch) mm 8 × 18 × 120
Max. weight on table kg 2500
FEED RATES
(X/ Y/ Z) Rapid traverse rate m/min 15 / 15 / 15
Cutting feed rate m/min 12
Ball screw diameter mm Ø 50
Guideway type  - Box way
AUTOMATIC TOOL CHANGE SYSTEM
Tool magazine capacity pcs 24
Max. tool weight kg 15
Max. tool diameter mm 110
Max. tool diameter without adjacent tools mm 200
Method of tool exchange - Arm type
Max. tool length mm 300
MOTOR
Spindle motor power< Cont. / 30 min> kW 24 / 30
X/Y/Z feed motor kW 4 / 4 / 7
Coolant pump motor<50 Hz / 60 Hz> kW 0.53 + 0.85 / 0.75 + 1.27
OTHERS
Air supply kg/cm² 5.5
Machine weight kg 17000
Machine dimension (L × W × H) m 5.4 × 3.9 × 3.0

 

Note: The manufacturer reserves the right to modify design and specifications of the machine without prior notice.