| ACCUWAY Vertical Turning Lathe(UV) | ||||||
| Item / Model | UV-45E | UV-55E | UV-75E | |||
| Controller | FANUC 0i-TD | FANUC 0i-TD | FANUC 0i-TD | |||
| Capacity | ||||||
| Max. swing diameter | mm | Ø600 | Ø750 | Ø850 | ||
| Max. cutting diameter | mm | Ø450 | Ø550 | Ø750 | ||
| Max. cutting length | mm | 400 | 500 | 600 | ||
| Spindle | ||||||
| Spindle speed | rpm | 2500 | 2000 | 1500 | ||
| Spindle bearing diameter | mm | Ø130 | Ø160 | Ø220 | ||
| Spindle nose | ASA | A2-8 | A2-11 | A2-11 | ||
| Power chuck diameter | in | 12 | 15 | 24 | ||
| TRAVELS | ||||||
| X- axis | mm | -20 /+230 | -20 / +280 | -50~+485 | ||
| Z- axis | mm | 450 | 550 | 800 | ||
| Rapid traverse - X axis | M / min | 20 | 20 | 20 | ||
| Rapid traverse - Z axis | M / min | 24 | 24 | 24 | ||
| tool Turret | ||||||
| Type | Hydraulic | Hydraulic | Hydraulic | |||
| Number of tools | units | 8 | 550 | 800 | ||
| Tool size square | mm | 25 | 20 | 20 | ||
| Tool size | mm | Ø40 | Ø24 | Ø24 | ||
| Motor | ||||||
| Spindle drive | kw | (FANUC αP30) 15/18.5 | (FANUC αP40) 18.5/22 | (FANUC αP40) 18.5/22 | ||
| X-axis | kw | 3 | 3 | 4 | ||
| Z-axis | kw | 3 | 3 | 4 | ||
| Hydraulic | kw | 2.2 | 2.2 | 2.2 | ||
| Collant Pump | kw | 0.5+1 | 0.5+1 | 0.5+1 | ||
| Power requirement | KVA | 35 | 45 | 50 | ||
| Dimensions | ||||||
| Floor space required | mm | 1750x3000 | 1750x3000 | 3400x2400 | ||
| Height | mm | 2500 | 2500 | 4000 | ||
| Weight(aprox) | kg | 5500 | 6000 | 13500 | ||
| Note: The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference. | ||||||
|
||||||
