| Item / Model | UT-300SY | ||||||||
| Controller | FANUC 18i-TB | ||||||||
| CAPACITY | |||||||||
| Swing over "Z" cover | mm (in) | 910 (35.83") | |||||||
| Swing over "X" cover | mm (in) | 720 (28.35") | |||||||
| Max cutting diameter (Main spindle) | mm (in) | 450 (17.7") | |||||||
| Max cutting diameter (Sub-spindle) | mm (in) | 375 (14.8") | |||||||
| Max cutting length | mm (in) | 615 (24.2") | |||||||
| MAIN SPINDLE | |||||||||
| Spindle nose taper | ASA | A2-8 | |||||||
| Spindle bearing inner diameter | mm (in) | 130 (5.12") | 140(5.51") | ||||||
| Power chuck diameter | mm (in) | 255 (10") | 306 (12") | ||||||
| Spindle hole diameter | mm (in) | 86 (3.39") | 101(3.98") | ||||||
| Spindle speed | rpm | 3,500 | 2,700 | ||||||
| Spindle drive power <30 min rating / continuous> |
kW (HP) | 15/ 18.5 | |||||||
| Bar capacity | mm (in) | 75 (2.95") | 90 (3.54") | ||||||
| SUB SPINDLE | |||||||||
| Sub spindle nose taper | ASA | A2-5 | |||||||
| Sub spindle power chuck diameter | mm (in) | 6 (0.2") | |||||||
| Sub spindle hole diameter | mm (in) | 56 (2.2") | |||||||
| Sub spindle speed | rpm | 6,000 | |||||||
| Sub spindle drive power <30 min rating / continuous> |
kW (HP) | 5.5/ 7.5 | |||||||
| Sub spindle bar capacity | mm (in) | - | |||||||
| TRAVELS | |||||||||
| Z axis | mm (in) | 750 (29.5") | |||||||
| Y axis | mm (in) | ±50 (1.97") | |||||||
| X axis | mm (in) | 275 (10.83") | |||||||
| B axis | mm (in) | 660 (26") | |||||||
| FEED RATES | |||||||||
| Rapid traverse- Z axis | m/min | 24 (945) | |||||||
| Rapid traverse- Y axis | m/min | 10 (393) | |||||||
| Rapid traverse- X axis | m/min | 20 (787) | |||||||
| Rapid traverse- B axis | m/min | 24 (945) | |||||||
| TOOL TURRET | |||||||||
| Type | APT40/ VDI 40 | ||||||||
| Number of tools | station | 12 | |||||||
| Square tool shank size | mm (in) | 25 (0.98") | |||||||
| Round tool shank size | mm (in) | 40 (1.6") | |||||||
| Cs spindle index angle | deg | 0.01 | |||||||
| Max. rotary tool speed | rpm | 4,000/ 5,000 | |||||||
| Rotary tool driver power | kW | 3/ 3.7 | |||||||
| TAILSTOCK | |||||||||
| Tailstock body travel | mm (in) | - | |||||||
| Quill travel | mm (in) | - | |||||||
| Quill diameter | mm (in) | - | |||||||
| Quill taper size | MT | - | |||||||
| Tailstock body positioning | - | ||||||||
| DIMENSIONS | |||||||||
| Floor space required | m (ft) | 3.5x 2 | |||||||
| Height | m (ft) | 2.2 | |||||||
| Weight | kg (Ib) | 6,500 | |||||||
| Note: The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference. | |||||||||
|
|||||||||
