| Item / Model | UT-300L | UT-300LM | |||||
| Controller | FANUC 0i-TC | ||||||
| CAPACITY | |||||||
| Swing over "Z" cover | mm (in) | 612 (24.1) | |||||
| Swing over "X" cover | mm (in) | 388 (15.2) | |||||
| Max. cutting diameter | mm (in) | 500 (19.7) | |||||
| Max. cutting length | mm (in) | 1,200 (47.2) | |||||
| SPINDLE | |||||||
| Spindle nose | ASA | A 2-8 | A 2-11 | ||||
| Power chuck diameter | mm (in) | 254 (10) / 304 (12) | 381 (15) | ||||
| Spindle hole diameter | mm (in) | 86 (3.4) / 101 (4.0) | 116 (4.57) | ||||
| Spindle speed | rpm | 3,500 / 2,700 | 2,500 | ||||
| Spindle drive power <30 min rating / continuous> |
kW (HP) | 15/ 18.5 (18.5/ 22) | |||||
| Bar capacity | mm (in) | 75 (3) | 90 (3.5) | 90 (3.5) | 105 (4.1) | ||
| TRAVELS | |||||||
| Z axis | mm (in) | 1,250 (49.2) | |||||
| X axis | mm (in) | 250 + 50 (9.8 +2) | |||||
| FEED RATE | |||||||
| Rapid traverse- Z axis | m/min(ipm) | 24 (945) | |||||
| Rapid traverse- X axis | m/min(ipm) | 20 (787) | |||||
| TOOL TURRET | |||||||
| Number of tools | station | 12 | |||||
| Square tool shank size | mm (in) | 25 (1) | |||||
| Round tool shank size | mm (in) | 40 (1.6) | |||||
| TAILSTOCK | |||||||
| Tailstock body travel | mm (in) | 1,040 (40.9) | |||||
| Quill travel | mm (in) | 120 (4.7) | |||||
| Quill diameter | mm (in) | 85 (3.3) | |||||
| Quill taper | MT# | 5 | |||||
| Tailstock body positioning | Programmable | ||||||
| DIMENSIONS | |||||||
| Floor space required | m (ft) | 3.8× 1.8 (11.8× 5.8) | |||||
| Height | m (ft) | 1.8 (5.9) | |||||
| Weight | kg (Ib) | 6,000 (13,300) | |||||
| Note: The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference. | |||||||
|
|||||||
