| Item / Model | UT-300 | UT-300M | |||
| Controller | FANUC 0i-TC | FANUC 0i-TC | |||
| CAPACITY | |||||
| Swing over "Z" cover | mm (in) | 612 (24.1) | |||
| Swing over "X" cover | mm (in) | 388 (15.3) | |||
| Max. cutting diameter | mm (in) | 500 (19.7) | 425 (16.7) | ||
| Max. cutting length | mm (in) | 700 (27.6) | 670 (26.4) | ||
| SPINDLE | |||||
| Spindle nose | ASA | A 2-8 | |||
| Power chuck diameter | mm (in) | 254 (10)/ 304 (12) | |||
| Spindle hole diameter | mm (in) | 86 (3.4)/ 101 (4) | |||
| Spindle speed | rpm | 3,500/ 2,700 | |||
| Spindle drive power <30 min rating / continuous> |
kW (HP) | 15/ 18.5 | |||
| Bar capacity | mm (in) | 75 (3)/ 90 (3.5) | |||
| TRAVEL | |||||
| Z axis | mm (in) | 750 (30) | |||
| X axis | mm (in) | 250 + 50 (9.8 +2 ) | 300 (11.8) | ||
| FEED RATE | |||||
| Rapid traverse- Z axis | m/min(ipm) | 24 (945) | |||
| Rapid traverse- X axis | m/min(ipm) | 20 (787) | |||
| TOOL TURRET | |||||
| Type | Hydraulic | Dodecagonal drum/ VDI | |||
| Number of tools | station | 12 | 12 | ||
| Square tool shank size | mm (in) | 25 (1) | 25 (1) | ||
| Round tool shank size | mm (in) | 40 (1.6) | 40 (1.6) | ||
| Cs spindle index angle | deg | - | 0.01 | ||
| Max. rotary tool speed | rpm | - | 4000/ 5000 | ||
| Rotary tool driver power | kW | - | 3/3.7 | ||
| TAILSTOCK | |||||
| Tailstock body travel | mm (in) | 540 (21.3) | |||
| Quill travel | mm (in) | 120 (4.7) | |||
| Quill diameter | mm (in) | 85 (3.3) | |||
| Quill taper | MT# | 5 | |||
| Tailstock body positioning | Programmable | ||||
| DIMENSION | |||||
| Floor space | m (ft) | 3× 1.8 (9.8× 5.8) | |||
| Height | m (ft) | 1.8 (5.9) | |||
| Weight | kg (Ib) | 5,500 (12,200) | |||
| Note: The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference. | |||||
|
|||||
