| Machine Model | UT-200S | UT-200SM | ||||
| Controller | FANUC 0i-TC | FANUC 18i-TB | ||||
| CAPACITY | ||||||
| Swing over "Z" cover | mm (in) | 522(20.5") | ||||
| Swing over "X" cover | mm (in) | 318 (12.5") | ||||
| Max cutting diameter (Main spindle) | mm (in) | 260 (10.2") | 286 (11.3") | |||
| Max cutting diameter (Sub-spindle) | mm (in) | 260 (10.2") | 286 (11.3") | |||
| Max cutting length | mm (in) | 495 (19.5") | ||||
| SPINDLE | ||||||
| Spindle nose taper | ASA | A 2-6 | ||||
| Power chuck diameter | mm (in) | 210 (8") | 648 (8") | |||
| Spindle hole diameter | mm (in) | 62 (2.4") | 76 (3") | |||
| Spindle speed | rpm | 4,500 | ||||
| Spindle drive power <30 min rating / continuous> |
kW(HP) | 11/ 15 | ||||
| Bar capacity | mm (in) | 52/ 65 (2"/ 2.6") | ||||
| SUB SPINDLE | ||||||
| Sub spindle nose taper | ASA | A 2-5 | ||||
| Sub spindle power chuck diameter | mm (in) | 169 (6") | 153 (6") | |||
| Sub spindle hole diameter | mm (in) | 56 (2.2") | ||||
| Sub spindle speed | rpm | 6,000 | ||||
| Sub spindle drive power <30 min rating / continuous> |
kW (HP) | 5.5/7.5 (7.5/10.2) | ||||
| Sub spindle bar capacity | mm (in) | 45 (1.8") | ||||
| TRAVELS | ||||||
| Z axis | mm (in) | 600 (23.6") | ||||
| X axis | mm (in) | 220 (8.7") | ||||
| B axis | mm (in) | 625 (24.6") | ||||
| FEED RATES | ||||||
| Rapid traverse- Z axis | m/min(ipm) | 20 (787) | ||||
| Rapid traverse- X axis | m/min(ipm) | 20 (787) | ||||
| Rapid traverse- B axis | m/min(ipm) | 20 (787) | ||||
| TOOL TURRET | ||||||
| Type | VDI30 | |||||
| Number of tools | station | 12 | ||||
| Square tool shank size | mm (in) | 20 (0.75") | ||||
| Round tool shank | mm (in) | 32 (1.25") | ||||
| Cs spindle index angle | deg | - | 0.015 | |||
| Max. rotary tool speed | rpm | - | 6,000 | |||
| Rotary tool driver power | kW | - | 2.2 | |||
| DIMENSIONS | ||||||
| Floor space required | m(ft) | 2.9x1.6 (9.5 5.2) | ||||
| Height | m(ft) | 1.7 | ||||
| Weight | kg | 4,000 | ||||
|
||||||
