| Item / Model | UT-200 | UT200M | |||
| Controller | FANUC 0i-TC | ||||
| CAPACITY | |||||
| Swing over "Z" cover | mm (in) | 505 (19.9) | |||
| Swing over "X" cover | mm (in) | 318 (12.5) | |||
| Max. cutting diameter | mm (in) | 350 / 270 (13.8 / 10.6) | |||
| Max. cutting length | mm (in) | 570 (22.4) | |||
| SPINDLE | |||||
| Spindle nose | ASA | A 2-5/ A 2-6 | |||
| Power chuck diameter | mm (in) | 169 (6)/ 210 (8) | |||
| Spindle hole diameter | mm (in) | 56 (2.2); 62/ 76(2.4/ 3) | |||
| Spindle speed | rpm | 6,000; 4,500/ 4,000 | |||
| Spindle drive power <30 min rating / continuous> |
kW (HP) | 11/ 15 | |||
| Bar capacity | mm (in) | 44 (1.7); 52/ 65 (2 / 2.6) | |||
| TRAVEL | |||||
| Z axis | mm (in) | 600 (23.6) | |||
| X axis | mm (in) | 220 (8.7) | |||
| FEED RATE | |||||
| Rapid traverse- Z axis | m/min(ipm) | 20 (787) | |||
| Rapid traverse- X axis | m/min(ipm) | 20 (787) | |||
| TOOL TURRET | |||||
| Type | Hydraulic | VDI | |||
| Number of tools | station | 8 (10/ 12) | 12 | ||
| Square tool shank size | mm (in) | 25 (1) / 20 (0.8) | 20 (0.8) | ||
| Round tool shank size | mm (in) | 32 (1.3) | 30 (1.2) | ||
| Cs spindle index angle | deg | - | 0.015 | ||
| Max. rotary tool speed | rpm | - | 6000 | ||
| Rotary tool driver power | kW | - | 2.2 | ||
| TAILSTOCK | |||||
| Tailstock body travel | mm (in) | 545 (21.5) | |||
| Quill travel | mm (in) | 80 (3.1) | |||
| Quill diameter | mm (in) | 75 (3) | |||
| Quill taper | MT# | 4 | |||
| Tailstock body positioning | Manual \ Programmable | ||||
| DIMENSION | |||||
| Floor space | m (ft) | 2.9 × 1.6(9.5 × 5.3) | |||
| Height | m (ft) | 1.7(5.6) | |||
| Weight | kg (Ib) | 3,600(7,920) | |||
| Note: The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference. | |||||
|
|||||
