| Item / Model | UM-85 | |||||
| SPINDLE | ||||||
| Spindle speed | rpm | 8,000 (10,000) | ||||
| Spindle taper hole | BT40 | |||||
| Bearing inner diameter | mm (in) | 70 (2.8) | ||||
| Drive system | mm | Belt | ||||
| TRAVELS | ||||||
| X-axis | mm (in) | 850 (33.5) | ||||
| Y-axis | mm (in) | 550 (21.7) | ||||
| Z-axis | mm (in) | 550 (21.7) | ||||
| Spindle nose to table | mm (in) | 150~700 (5.9~27.6) | ||||
| TABLE | ||||||
| Table dimension | mm (in) | 1100× 600 (43.3x 23.6) | ||||
| T-slot (No. of T-slot × width × pitch) | mm (in) | 5 × 18 × 100 (0.2x 0.71x 3.9) | ||||
| Max. weight on table | kg (lb) | 1,000 (2204.6) | ||||
| FEED RATE | ||||||
| (X/ Y/ Z) Rapid traverse rate | m/min(ipm) | 30 (1,181) | ||||
| Cutting feed rate | m/min(ipm) | 12 (472.4) | ||||
| Ball screw diameter | mm (in) | Ø 45(1.8) | ||||
| Guideway type | Linear | |||||
| AUTOMATIC TOOL CHANGE SYSTEM | ||||||
| Capacity | station | 24 | ||||
| Max. tool weight | kg (lb) | 7 (15.4) | ||||
| Max. tool diameter | mm (in) | 80 (3.1) | ||||
| Max. tool diameter without adjacent tools | mm (in) | 150 (5.9) | ||||
| Method of tool exchange | Arm type | |||||
| Max. tool length | mm (in) | 300 (11.8) | ||||
| Controller | ||||||
| Type | FANUC 0i-MD/ Heidenhain i TNC 530 | |||||
| High speed high precision | AICC | |||||
| Data server | - | |||||
| MOTOR | ||||||
| Spindle motor power < Cont. / 30 min> |
kW | 7.5/ 11 (15/ 18.5) | ||||
| X/Y/Z feed motor | kW | 3/ 3/ 4 (3/ 3/ 7) | ||||
| Coolant pump motor <50 Hz / 60 Hz> |
kW | 0.53 + 0.85/ 0.75 + 1.27 | ||||
| OTHERS | ||||||
| Air supply | kg/cm² | 5.5 | ||||
| Machine weight | kg (lb) | 7,000 (15,432.3) | ||||
| Machine dimension (L × W × H) | m (ft) | 2.7× 2.2× 3.0 (8.9x 7.2x 9.8) | ||||
| Note: The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference. | ||||||
|
||||||
