| Item / Model | UM-60 | |||
| SPINDLE | ||||
| Spindle speed | rpm | 8,000 | ||
| Spindle taper hole | BT40 | |||
| Bearing inner diameter | mm (in) | 70 (2.8) | ||
| Drive system | mm | Belt | ||
| TRAVELS | ||||
| X-axis | mm (in) | 600 (23.6) | ||
| Y-axis | mm (in) | 510 (20) | ||
| Z-axis | mm (in) | 510 (20) | ||
| Spindle nose to table | mm (in) | 150~660 (5.9~26) | ||
| TABLE | ||||
| Table dimension | mm (in) | 900× 560 (35.4x 22) | ||
| T-slot (No. of T-slot × width × pitch) | mm (in) | 5× 18× 100 (0.2x 0.7x 3.9) | ||
| Max. weight on table | kg (Ib) | 500 (1100) | ||
| FEED RATE | ||||
| (X/ Y/ Z) Rapid traverse rate | m/min | 36/ 36/ 30 | ||
| Cutting feed rate | m/min | 12 | ||
| Ball screw diameter | mm (in) | Ø 45 (1.8) | ||
| Guideway type | Linear | |||
| AUTOMATIC TOOL CHANGE SYSTEM | ||||
| Capacity | station | 24 | ||
| Max. tool weight | kg (Ib) | 7 (15.4) | ||
| Max. tool diameter | mm (in) | 80 (3.1) | ||
| Max. tool diameter without adjacent tools | mm (in) | 150 (5.9) | ||
| Method of tool exchange | Arm type | |||
| Max. tool length | mm (in) | 300 (11.8) | ||
| Controller | ||||
| Type | FANUC 0i-MD/ Heidenhain i TNC 530 | |||
| High speed high precision | AICC | |||
| Data server | - | |||
| MOTOR | ||||
| Spindle motor power < Cont. / 30 min> |
kW (HP) | 7/ 11 | ||
| X/Y/Z feed motor | kW (HP) | 3/ 3/ 4 | ||
| Coolant pump motor <50 Hz / 60 Hz> |
kW (HP) | 0.53 + 0.85 / 0.75 + 1.27 | ||
| OTHERS | ||||
| Air supply | kg/cm² | 5.5 | ||
| Machine weight | kg (Ib) | 5,200 (11,440) | ||
| Machine dimension (L × W × H) | m (ft) | 2.0× 2.3× 2.6 (6.56×7.5×8.5) | ||
|
||||
