Item / Model		UM-350V5
SPINDLE
Spindle speed	rpm	12,000 (10,000)
Spindle taper hole		BT40
Bearing inner diameter	mm (in)	70 (2.8)
Drive system		Direct
TRAVELS
X-axis travel	mm (in)	700 (27.6)
Y-axis travel	mm (in)	550 (21.7)
Z-axis travel	mm (in)	470 (18.5)
A-axis travel (tilting)	deg	-120°/ +10°
C-axis travel	deg	360°
TABLE
Max. speed of rotary axis (C-axis)	rpm	33.3
Max. speed of tilting axis (A-axis)	rpm	25
Max. weight on table at 0°	kg (lb)	200 (440.9)
Max. weight on table at 90°	kg (lb)	100 (220.5)
Spindle nose to table	mm (in)	120-590
Table dimension	mm (in)	Ø 350 (13.8)
Max. swing	mm (in)	Ø 490 (19.3)
Max. workpiece size	mm (in)	Ø 490x450 (19.3x17.7)
T-slot size	mm (in)	12
FEED RATE
(X/ Y/ Z) Rapid traverse rate	m/min(ipm)	42/ 42/ 30 (1,653.4/ 1,653.4/ 1,181)
Cutting feed rate	m/min(ipm)	12 (472.4)
Ball screw diameter	mm (in)	45 (1.8)
AUTOMATIC TOOL CHANGE SYSTEM
Guideway type		Linear
Capacity of tool magazine	station	24
Max. tool wight	kg (lb)	7 (15.4)
Max. tool diameter	mm (in)	80 (3.15)
Max. tool diameter without adjacent tools	mm (in)	150 (5.9)
Method of tool exchange		Arm type
Max. tool length	mm (in)	300 (11.8)
Controller
Controller type		FANUC-18i-MB/ Heidenhain i TNC 530
MOTOR
Spindle motor power <Cont./30 min>	kW (HP)	7.5/ 11 (10.2/ 15)
X/Y/Z feed motor	kW (HP)	3/ 3/ 4 (4/ 4/ 5.4)
Coolant pump motor <50 Hz/60 HZ>	kW (HP)	0.53+0.85/ 0.75+1.27 (0.7+ 1.2/ 1+ 1.73)
OTHERS
Air supply	kg/cm2 (lb/in2)	5.5
Weight	kg (lb)	7,500 (16,534.6)
Dimension [L x W x H]	m (ft)	2.7 x 2.2 x 3.2 (8.9x 7.2x 10.5)
Note: The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference.