Item / Model		UM-160
SPINDLE
Spindle speed	rpm	6,000
Spindle taper hole		BT 50
Bearing inner diameter	mm (in)	90 (3.5)
Spindle drive system		2-speed gear
TRAVELS
X-Axis travel	mm (in)	1,600 (63)
Y-Axis travel	mm (in)	850 (33.5)
Z-Axis travel	mm (in)	850 (33.5)
Spindle nose to table travel	mm (in)	200~1,050 (7.9~ 41.4)
TABLE
Table dimension	mm (in)	1,700x 880 (66.9x 34.7)
T-Slot (No. of T-Slot ×width×pitch)	mm (in)	7× 18× 100 (0.3x 0.7x 3.9)
Max. weight on table	kg	2,000
FEED RATE
Rapid feed rate (X/Y/Z)	m/min(ipm)	15/ 15/ 15 (590/ 590/ 590)
Cutting feed rate	m/min	12
Ball screw diameter	mm (in)	Ø50 (2)
Guideway type		Box way
AUTOMATIC TOOL CHANGE SYSTEM
Capacity of tool magazine	pcs	24
Max. tool wight	kg (lb)	15 (33)
Max. tool diameter	mm (in)	110 (4.3)
Max. tool diameter without adjacent tools	mm (in)	200 (7.9)
Method of tool exchange		Arm type
Max. tool length	mm (in)	300 (11.81)
Controller
Controller type		FANUC 0i-MD/ Heidenhain i TNC 530
High speed high precision		AICC
Data server		-
MOTOR
Spindle motor power <Cont./30 min>	kW	15/ 18.5
X/Y/Z feed motor	kW	4/ 4/ 7
Coolant pump motor <50 Hz/60 Hz>	Kw	0.53+0.85/ 0.75+1.27
OTHERS
Air supply	kg/cm2	5.5
Weight	kg (lb)	15,000 (33,000)
Dimension (L×W×H)	m (ft)	4.4× 3.2× 3.2 (14.4×10.5×10.5)
Note: The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference.