| Item / Model | UL-15 | ||||
| Controller | FANUC 0i-TC | ||||
| CAPACITY | |||||
| Swing over "Z" cover | mm (in) | 455 (17.9) | |||
| Swing over "X" cover | mm (in) | 260 (10.2) | |||
| Max. cutting diameter | mm (in) | 330 (13) | |||
| Max. cutting length | mm (in) | 300 (11.8) | |||
| SPINDLE | |||||
| Spindle nose | ASA | A 2-5 | A 2-6 | ||
| Power chuck diameter | mm (in) | 169 (6) | 210 (8) | ||
| Spindle hole diameter | mm (in) | 56 (2.2) | 62 (2.4) | ||
| Spindle speed | rpm | 6,000 | 4,500 | ||
| Spindle drive power <30 min rating / continuous> |
kW (HP) | 11/ 15 | |||
| Bar capacity | mm (in) | 44 (1.7) | 52 (2) | ||
| TRAVELS | |||||
| Z axis | mm (in) | 350 (13) | |||
| X axis | mm (in) | 175 (6.9) | |||
| FEED RATES | |||||
| Rapid traverse- Z axis | m/min(ipm) | 20 (787) | |||
| Rapid traverse- X axis | m/min(ipm) | 20 (787) | |||
| TOOL TURRET | |||||
| Number of tools | station | 8/ 12 | |||
| Square tool shank size | mm (in) | 25 (1) / 20 (0.8) | |||
| Round tool shank size | mm (in) | 32 (1.3) | |||
| TAILSTOCK | |||||
| Tailstock body travel | mm (in) | 200 (7.9) | |||
| Quill travel | mm (in) | 80 (3.1) | |||
| Quill diameter | mm (in) | 70 (2.8) | |||
| Quill taper | MT# | 4 | |||
| Tailstock body positioning | Manual | ||||
| DIMENSION | |||||
| Floor space | m (ft) | 1.9× 1.3 (6.4× 4.2) | |||
| Height | m (ft) | 1.6 (5.3) | |||
| Weight | kg (Ib) | 3,000 (6,600) | |||
| Note: The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without prior notice. | |||||
|
|||||
